Quick Answer: Gutter installation costs $4–$12 per linear foot installed. An average home with 150 linear feet runs $700–$2,000 for aluminum gutters. Copper gutters can reach $4,500+ for the same home.
How Much Does Gutter Installation Cost?
| Material | Cost per Linear Foot | 150 LF Estimate | Lifespan |
|---|---|---|---|
| Vinyl | $3–$5 | $450–$750 | 10–20 years |
| Aluminum (sectional) | $4–$8 | $600–$1,200 | 20–30 years |
| Aluminum (seamless) | $6–$12 | $900–$1,800 | 20–30 years |
| Steel | $6–$12 | $900–$1,800 | 20–30 years |
| Copper | $15–$30 | $2,250–$4,500 | 50+ years |
K-Style vs Half-Round Gutters
K-style (ogee profile) is the most popular—flat back, decorative front, handles high water volume well. Half-round gutters have a classic look and flow slightly better but cost more to install. Both are available in 5-inch and 6-inch widths.
Downspout Cost
Downspouts typically run $5–$12 per linear foot installed. Most homes need 3–4 downspouts; each 10-foot section runs $50–$120 plus elbows and splash blocks. Underground drains to carry water away from the foundation add $100–$300 per outlet.
⚡ Get 5 free AI guides + weekly insights
Gutter Removal & Disposal
Removing old gutters adds $0.50–$1.50 per linear foot. Full tearout and disposal for a 150 LF home typically runs $75–$225 on top of the new installation quote.
Signs You Need New Gutters
- Visible cracks, holes, or separated joints
- Paint peeling or rust staining on siding below gutters
- Gutters pulling away from the fascia board
- Standing water or mildew near the foundation
- Gutters sagging between hangers
How long do gutters last?
Aluminum gutters last 20–30 years. Copper gutters can last 50+ years. Vinyl gutters are shortest-lived at 10–20 years, especially in areas with wide temperature swings.
What size gutter do I need?
Most residential homes use 5-inch K-style gutters. Homes with large roof areas or steep pitches may need 6-inch gutters for adequate drainage capacity.
Are seamless gutters worth the extra cost?
Yes. Seamless gutters are custom-cut on site to eliminate mid-span joints, which are the most common source of leaks. The cost difference over sectional gutters is usually modest.
Do I need gutter guards?
Gutter guards reduce cleaning frequency but don't eliminate it. Micro-mesh guards are most effective. Expect to pay an additional $1–$10 per linear foot depending on type.
📋 Estimate Permit Costs for Your Project
Use our permit cost estimator to budget for local fees before your gutter or exterior project starts.
Permit Cost Estimator →